|
Product Name |
C31 |
Procedure |
P7 |
|
Workstation |
Rear Radar Assembly |
Version |
A2 |
Products to use
| Name | Part number | Number | Description |
| HS508C Radar 4G Module reID No Card | 758-000172 | 1 |
|
| M4 * 12 stainless steel flange inner hexagon machine tooth bolt _ whole circle resistant to falling | 126-000922 | 4 | Rear radar * 4 |
| HD5150 Rear View Radar Connector Dust Cap | 201-002488 | 1 |
|
Work Instructions
| Step 1 | 1. Lock the rear radar to the designated position of the medicine box with 4 M4 * 12 stainless steel flange hexagonal machine tooth screws as shown in the figure; torque: 0.8 ± 0.08N.m |
| Use tools & fixtures | 1. Electric Batch 2. Torque Calibrator |
| Operational special requirements | 1. Screen without leakage lock 2. Torque without abnormality 3. Screen lock without abnormality |
| Step 2 | 1. Attach the rear radar wire harness to the designated wire card of the medicine box according to the diagram; 2. Assemble the rear radar harness connector with the dust cap, and then insert it into the designated cable card of the connector holder according to the diagram; |
| Use tools & fixtures | 1. Electric Batch 2. Torque Calibrator |
| Operational special requirements | 1. Thread/nut without leakage lock 2. Torque without abnormality 3. Thread/nut lock without abnormality 4. Visual inspection of thread teeth needs to protrude outside the nut |
| General requirements |
| 1. Operators must wear anti-static wrists and finger covers or gloves |
| 2. The workbench should always be kept clean and tidy |
| 3. If you find three similar abnormalities, please report to the production line administrator immediately |
| 4. Label the unqualified parts and place them in the designated defective product placement box |