Quick Start or First-Time Setup Guide

• Register a Ceres Server Account – Online
• Customers must first register a Ceres server account using an email address. Registration link: https://www.applicatorview.com
• Log in to the Remote App and Update Software
• Log in to the Ceres App using the registered account
• Update the App to the latest version
• Unbox/Assemble/Install Drone and Spray Base
• Unbox and Assemble the drone and spray base
• Ensure all cables are properly connected and secured.
• Hot plugging of any cables, connectors, or modules is strictly prohibited.
• How to Pair the Drone with the Remote
• Power on the drone and Remote
• Open the App and go to Settings → Remote Controller
• Select Pair / Bind from the remote controller menu
• Press and hold the drone battery button and observe the LED indicator
• The drone and remote controller will pair automatically
• Activate the Drone and Update Firmware
• Enter the activation code in the App to activate the drone:
• Ceres Drone Activation Code: UC5A0FE7
• Follow the on-screen instructions to update the drone firmware to the latest version
• Tank and flow meter calibration
• Go to Start → Settings → Spray and follow the instructions to perform
• Empty tank calibration
• Full tank calibration
• Flow meter calibration. (Note: Before calibrating the flow meter, use the upper-right button on the remote controller to perform pipeline purging, ensuring that all air is removed from the system. Make sure the Flow Coefficient value is around 100 (acceptable range: 90–110).

Important Notes

A stable and reliable internet or cell network connection is required when updating the App or drone firmware. Poor network connectivity may cause updating failures or firmware issues.